MIL-P-18140(SHIPS)
3.7.2 Outline drawings of the units (pump and driver) shall refurnished on each contractor order;
no detail of parts shall be shown on outline drawings.
3.7.3 Pump master drawings shall include detail drawings of all parts, and sectional assembly
drawings with lists of material comprising all parts.
3.7.3.1 Detail drawings shall contain a number of details on each sheet; details of a s ngle pump
part on size A sheets, resulting in a multiplicity of drawing sheets, shall be avoided.
3.7.3.2 The sectional assembly drawing shall contain a complete list of material with references
to detail drawings, The assembly drawing shall not include couplings or brackets which may vary with
different contracts or orders.
3.7.3.3 Any subassembly made up `of parts which require special alignment or assembly methods
which cannot be disassembled, repaired and reassembled onboard ship without the use of special tools
and jigs shall be indicated as a subassembly in the list of material.
3.7.4 On detail drawings, surface roughness, waviness and lay shall be specified in accordance
with requirements and symbols specified in Standard MIL-STD- 10.
3.7.5 Drawings for drivers and associated equipment shall be in accordance with their respective
specifications.
3.8 Technical manuals, -
3.8.1 Technical manuals shall be in accordance with type C of Specification MIL-T- 15071,
3.8.2 Identification piece numbers of parts referred to in technical manuals shall be identical to
the identification piece numbers shown on approved master drawings.
3.8.3 Technical manuals shall contain reproductions of dimensioned outline drawings of all units.
3.8.4 Complete characteristic curves based on performance acceptance tests shall be included in
each technical manuals.
3.8.5 Preliminary technical manuals submitted for approval shall include all proposed sections of
the books,
3.8.6 Two copies of technical manuals shall be packed with each pump unit. Additional copies shall
be furnished as specified (see 6, 1). If final technical manuals are not available at the time pumps are
shipped, then 2 copies of preliminary technical manuals shall be packed with each pump unit, The final
books shall be delivered at a later time as specified in Specification MIL-B- 15071.
3.9 Repair parts and tools. -
3.9.1 Onboard. - Repair parts shall be furnished and processed in accordance with Specifica -
.
tion MIL-R-15137.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business