MIL-DTL-5515F
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part
of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
AN6201
Pump - Hydraulic Hand
AN6248
Pump - Hydraulic Hand, Type 3000
MS21344
Fitting - Installation Flared Tube, Straight Threaded Connectors, Design Standard For
MIL-PRF-5606
Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance
MIL-PRF-83282
Hydraulic Fluid Fire Resistant, Synthetic Hydrocarbon Base, Metric NATO Code
Number H-537
MIL-PRF-87257
Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft
And Missile
(Copies of these documents are available online at https://quicksearch.dla.mil or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 17025
General Requirements for the Competence of Testing and Calibration Laboratories
(Copies of these documents are available online at https://www.iso.ch or from the International Organization for
nd
th
Standardization American National Standards Institute, 11 West 42 Street, 13 Floor, New York, NY 10036.)
NCSL INTERNATIONAL
NCSL Z540.3
Requirements for the Calibration of Measuring and Test Equipment
(Copies of these documents are available online at https://www.ncsli.org or from NCSL International, 2995
Wilderness Place, Suite 107 Boulder, Colorado 80301-5404.)
SAE INTERNATIONAL
SAE-AS8775
Hydraulic System Components, Aircraft and Missiles, General Specification For
(Copies of these documents are available from SAE International, 400 Commonwealth Drive, Warrendale, PA
15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text
of this document and the references cited herein (except for related specification sheets), the text of this document
take precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific
exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business