INCH-POUND
MIL-DTL-5515F
16 December 2013
SUPERSEDING
MIL-DTL-5515E
18 January 2011
DETAIL SPECIFICATION
PUMP, HYDRAULIC, RAM, HAND DRIVEN
Inactive for new design after 4 April 1996.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers general requirements for hand-driven hydraulic ram pumps used on type I
(-65 °F to +165 °F) aircraft hydraulic systems conforming to SAE-AS8775.
1.2 Classification part. Pumps fabricated to this specification are classified as follows:
Class 1500
1,500 PSI operating pressure
Class 3000
3,000 PSI operating pressure
1.2.1 Part or Identifying Number (PIN). PINs to be used pump, hydraulic, ram, hand driven acquired to this
specification are created as follows:
M
5515
-
001
001
Specification number
M prefix
001
AN6201
Class 1500
002
AN6248
Class 3000
Comments, suggestions, or questions on this document should be addressed to DLA Land and Maritime,
ATTN: VAI, P.O. Box 3990, Columbus OH 43218-3990 or emailed to FluidFlow@dla.mil. Since contact
information can change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.dla.mil.
AMSC N/A
FSC 4730
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business