MIL-P-53108(ME)
AMERICAN PETROLEUM INSTITUTE (API)
Std 610 - Centrifugal Pumps for General Refinery Service.
(Application for copies should be addressed to the American Petroleum Institute,
1220 L Street, Northwest, Washington, DC 20005.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualifications. (Application for copies should be addressed to the American Society of Mechanical
Engineers, 345 East 47th Street, New York, NY 10017.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 3953 - Strapping, Flat Steel and Seals.
D 4675 - Selection and Use of Flat Strapping Materials.
(Application for copies should be addressed to the American Society for Testing and
Materials, 1916 Race Street, Philadelphia PA 19103.)
HYDRAULIC INSTITUTE
Rating Standards and Test Code Standards.
(Application for copies should be addressed to the Hydraulic Institute, 712 Lakewood Center
North, Cleveland, OH 44107.)
(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein (except for related associated detail specifications, specification sheets or MS standards), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Description. The pump unit shall be a skid-mounted, diesel-engine-driven, horizontal split case, multistage, centrifugal pump (see figure 1 and 6.7). The unit shall have an operational point of 800 gpm at 1800 feet total head when pumping diesel fuel with a specific gravity of 0.85 (7.08 lb/gal).
3.2 First article. Unless otherwise specified (see 6.2), a sample shall be subjected to first article inspection (see 6.3) in accordance with 4.3.
3.3 Materials. The material shall be as specified herein. Materials not specified shall be selected by the contractor and shall be subject to all provisions of this specification.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business