MIL-P-53065(ME)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
No. 70 - National Electrical Code.
(Application for copies should be addressed to the National Fire Protection
Association, 470 Atlantic Avenue, Boston, MA 02210.)
UNDERWRITERS Laboratory (UL)
UL 674 - Electric Motors and Generators for use in Laboratories, Inc.
(Application for copies should be addressed to Underwriters Laboratories,
Inc., 333 Pfingsten Road, Northbrook Road, IL 60062.)
SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT
Rule 422 - Usage of Solvents.
(Application for copies should be addressed to South Coast Air Quality
Management District, 9150 East Flair Drive, El Monte, CA 91731.)
(Non-Government standards and other publications are normally available from
the organizations which prepare or which distribute the documents. These
documents also may be available in or through libraries or other informational
services. )
2.3 Order of precedence. In the event of a conflict between the text of this
specification and the references cited herein, (except for associated detail
specifications, specifications sheets or MS standards), the text of this
specification shall take precedence. Nothing in this specification, however,
shall supersede applicable laws and regulations unless a specific exemption has
been obtained.
3.
REQUIREMENTS
3.1 Description. The pumping unit shall be a self priming centrifugal pump
as defined by the Hydraulic Institute with a capacity of 35 GPM at 25 feet total
head.
3.2 First article. Unless otherwise specified (see 6.2), a sample shall be
subjected to first article inspection (see 4.3 and 6.3). Any changes or
deviations of the pumping unit from the approved first article during
production will be subject to the approval of the contracting officer. Approval
of the first article will not relieve the contractor of his obligation to furnish
pumping units conforming to this specification.
3.3 Materials. Materials shall be as specified herein. Materials not
specified shall be selected by the contractor and shall be subject to all
provisions of this specification.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business