MIL-P-14514G
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Quali-
fication.
(Application for copies-should be addressed to the American Society of
Mechanical Engineers, 345 East 47th Street, New York, NY 1001.7).
AMERICAN WELDING SOCIETY (AWS)
D1.1 - Structural Welding Code - Steel.
(Application for copies should be addressed to American Welding Society, 550
NW Lejeune Rd, P.O. Box 351040, Miami, FL 33126).
HYDRAULIC INSTITUTE (HI)
Rating Standards and Test Code Standards.
(Application for copies should be addressed to the Hydraulic Institute, 1230
Keith Building, Cleveland, OH 44115.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE J 429 - Mechanical and Material Requirements for Externally Threaded
Fasteners.
(Application for copies should be addressed to the Society of Automotive
Engineers, 400 Commonwealth Drive, Warrendale, PA 15096. )
(Non-Government standards and other publications are normally available from
These
the organizations which prepare or which distribute the documents.
documents also may be available in or through libraries or other informational
services.)
In the event of a conflict between the text of this
2..3 Order of precedence.
specification and the references cited herein, (except for associated detail
specifications, specifications sheets or MS standards), the text of this
specification shall take precedence. Nothing in this specification, however,
shall supersede applicable laws and regulations unless a specific exemption has
been obtained.
3.
REQUIREMENTS
3.1 Description. The pumps shall be in accordance with the applicable Top
Assembly TA13200E7200 (type 11) or TA13200E7210 (type I) and as specified herein.
3.1.1 Drawings. The drawings forming a part of this specification are end
product drawings. No deviation from the prescribed dimensions or tolerances is
permissible without prior approval of the contracting officer. Where tolerances
could cumulatively result in incorrect fits, the contractor shall provide
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business