MIL-P-17574D(YD)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70 - National Electrical Code.
(Application for copies should be addressed to the National Fire Protection
Association, Batterymarch Park, Quincy, MA 02269.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC.
(SAE)
SAE J537 - Storage Batteries.
(Application for copies should be addressed to the Society of Automotive
Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.)
(Non-Government standards and other publications are normally available from
the organizations that prepare or distribute the documents. These documents
also may be available in or through libraries or other informational services.)
2.3 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Description.
Unless otherwise specified (see 6.2), the pump-engine
system shall consist essentially of the following: a single-stage centrifugal
pump, with the pump casing split horizontally (axially) or vertically at the
option of the manufacturer unless either type of casing is definitely specified;
diesel engine for driving the pump; engine controls; and a steel skid base.
3.2 First article. When specified (see 6.2), the contractor shall furnish a
system for first article inspection and approval (see 4.2.1 and 6.6)
3.3 Standard commercial product. The system shall, as a minimum, be in
accordance with the requirements of this specification and" may be the
manufacturer's standard commercial product. Additional or better features which
are not specifically prohibited by this specification but which are a part of
the manufacturer's standard commercial product, may be included in the system
being furnished. A standard commercial product is a product which has been sold
or is being currently offered for sale on the commercial market through
advertisements of manufacturer's catalogs, or brochures, and represents the
latest production model.
3.3.1 System of measurement. The dimensions used in this specification are
not intended to preclude the use of metric system of measurement in the
fabrication and production of the material, individual parts, and the finished
product, provided form, fit, and function requirements are satisfied,
3.4 Materials. Materials used shall be free from defects which would
adversely affect the performance of maintainability of individual components or
of the overall assembly. Materials not specified herein shall be of the same
quality used for the intended purpose in commercial practice and shall be
subject to all provisions of this specification. In accordance with
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business