MIL-PRF-53051B
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation
(see 6.2).
SPECIFICATIONS
FEDERAL
A-A-52598
Couplings, Clamp, Pipe; with Bolts and Synthetic-Rubber Gaskets
for Grooved-End Pipe
(Unless otherwise indicated, copies of federal and military specifications, standards, and
handbooks are available from the Standardization Documents Order Desk, Building 4D,
700 Robbins Avenue, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following document(s) form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of the documents which are
DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unless
otherwise specified, the issues of documents not listed in the DoDISS are the issues of the
documents cited in the solicitation (see 6.2).
AMERICAN NATIONAL STANDARD INSTITUTE (ANSI)
ANSI Z 535.2
Environmental and Facility Safety Signs
(Applications for copies should be addressed to the American National Standard Institute,
11 W. 42nd Street, New York, NY 10036.)
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME B 1.1
Unified Inch Screw Threads (UN and UNR Thread Form).
ASME B 1.20.1
Pipe Threads, General Purpose (Inch).
ASME B 1.20.3
Dryseal Pipe Threads (Inch) Revision and Redesignation of
B2.2-1968
(Applications for copies should be addressed to the American Society of Mechanical
Engineers, 345 East 47th Street, New York, NY 10017.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business