INCH-POUND
MIL-PRF-52109H
21 December 2010
SUPERSEDING
MIL-PRF-52109G
13 August 1998
PERFORMANCE SPECIFICATION
PUMPING ASSEMBLIES, PORTABLE, BULK TRANSFER
FUEL AND WATER PUMPING SERVICE
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers portable, self-priming, centrifugal pumping
assemblies for fuel and water service.
1.2 Classification. The pumping assemblies will be of the following types, sizes, and
classes as specified (see 6.2):
Type I
Pumping Assembly, Fuel
Size 1 - 50 GPM capacity at 100 feet total head
Size 2 - 100 GPM capacity at 80 feet total head
Type II
Pumping Assembly, Water
Size 1 - 65 GPM capacity at 50 feet total head
Class 1 - Electric-motor driven (EMD)
Class 2 - Diesel-engine driven (DED)
Size 2 - 125 GPM capacity at 50 feet total head
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4320
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business