MIL-P-28501C(YD)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
(NEMA)
-
General Standards for Industrial Controls and Systems.
NEMA
ICS 1
-
Industrial Control Devices, Controllers and Assemblies.
NEMA
ICS 2
NEMA
ICS 6
-
Enclosures for Industrial Controls and Systems.
-
Motors and Generators.
NEMA
MG 1
NEMA
WC 3
-
Rubber-Insulated Wire and Cable for the Transmission and
Distribution of Electrical Energy.
(Application for copies should be addressed to the National Electrical
Manufacturers Association, 2101 L Street, N.W., Washington, DC 20037.)
UNDERWRITERS LABORATORIES INC.
(UL)
- Flexible Cord and Fixture Wire.
UL 62
UL 486C - Splicing Wire Connectors.
(Application for copies should be addressed to the Underwriters Laboratories
Inc. , 333 Pfingsten Road, Northbrook, IL 60062.)
(Non-Government standards and other publications are normally available from
These documents
the organizations that prepare or distribute the documents.
also may be available in or through libraries or other informational services )
2.3 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein, the text of this document takes
--
Nothing in this document, however, supersedes applicable laws and
precedence.
regulations unless a specific exemption has been obtained.
REQUIREMENTS
3.
3.1 Description. The pump assembly shall consist essentially of a vertical
multistage turbine pumping element, a submersible cable, a submersible electric
motor, and all necessary accessories and connectors required for a complete
deep-well submersible pump.
The specification does not require that column
piping or well casing be furnished with the pump assembly.
3.2
First article.
When specified in the contract or purchase order, a
sample shall be subjected to first article inspection (see 4.2.1 and 6.4).
3.3 Standard commercial product. The pump assembly shall, as a minimum, be
in accordance with the requirements of this specification and shall be the
manufacturer's standard commercial product.
Additional or better features which
are not specifically prohibited by this specification but which are a part of
the manufacturer's standard commercial product, shall be included in the system
being furnished.
A standard commercial product is a product which has been sold
or is being currently offered for sale on the commercial market through
advertisements or manufacturer's catalogs, or brochures, and represents the
latest production model.
--
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business