INCH-POUND
MIL-P-53108(ME)
26 October 1990
SUPERSEDING
(see 6.7)
MILITARY SPECIFICATION
PUMP UNIT, CENTRIFUGAL, DIESEL-ENGINE-DRIVEN,
800 GPM AT 1800 FEET TOTAL HEAD
This specification is approved for use within the USA Belvoir Research, Development and Engineering Center, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a skid-mounted, diesel-engine-driven, multistage, centrifugal pump.
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and standards form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).
SPECIFICATIONS FEDERAL
QQ-S-781 - Strapping, Steel, and Seals.
TT-W-572 - Wood Preservative: Water-Repellent.
VV-F-800 - Fuel Oil, Diesel.
PPP-B-601 - Boxes, Wood, Cleated-Plywood.
PPP-B-636 - Boxes, Shipping, Fiberboard. PPP-T-60 - Tape: Packaging, Waterproof.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: USA Belvoir Research, Development, and Engineering Center, ATTN: STRBE-TSE, Fort Belvoir, VA 22060-5606 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 4320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business