[INCH-POUND]
A-A-52038
25 October 1991
COMMERCIAL ITEM DESCRIPTION
PUMP ASSEMBLY, CENTRIFUGAL, WATER, DIESEL-ENGINE-DRIVEN,
3-INCH, SKID-MOUNTED, 200 GPM AT 300 FEET
The General Services Administration has authorized the use of this commercial item description in preference to Military Specification MIL-P-52469.
This item description covers a skid-mounted, diesel-engine-driven, auxiliary priming, centrifugal pump assembly for water pumping service.
Salient characteristics:
General: When specific requirements are not stated herein, all items listed as standard equipment in the manufacturers’ published specifications, brochures, and catalogs which are normally furnished to the commercial customer as standard equipment shall be furnished. In addition, the pump assembly shall be equipped with optional equipment and accessories as required to comply with the performance requirements specified herein. For the purpose of this item description, optional equipment may be defined as equipment not standard and not normally furnished with the pump assembly but which is available to the commercial customer on an optional basis. Any additional equipment or accessories needed to satisfy military requirements shall be specified in the contract or order. The additional equipment shall be constructed, assembled, and equipped with all components, whether or not specified herein, necessary to enable the unit to function reliably and efficiently in sustained operation. The pump assembly shall conform to all Federal laws and regulations applicable for this type equipment which are in effect on date of award of contract.
Materials: The pump shall be fabricated from compatible materials, inherently corrosion or treated to provide protection against the various forms of corrosion and deterioration that may be encountered in any of the applicable operation and storage environments to which the item may be exposed. Dissimilar metals shall not be used in intimate contact with each other unless protected against galvanic corrosion.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and other data which may improve this document should be sent by letter to: Commander, US Army Belvoir Research, Development and Engineering Center, ATTN: STRBE-TSE, Fort Belvoir, VA 22060-5606. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business